- Easy to use
- Intermediate Cut & Polish
O/W Polish – Intermediate is a general purpose polish with an intermediate cut, for the removal of most swirl mark defects. It can be used as part of a multi-step process or as a single step polish.
This product is based on a blend of soft, diminishing abrasives and contains no fillers. The abrasives initially give a higher cut but then break down under work, providing a fine abrasive composition that yields very high polishing effects with minimal cut. The lack of fillers means that the finish is due to the permanent correction of surface damage, rather than transient filling. It can remove significantly more damage that O/W Polish – Finishing, while still giving a good finish.
This product is intended to be applied either by hand (or using a machine) with a suitable pad or applicator and worked on the surface until the desired finish is produced.
The product should be used as supplied.
Care should be taken to avoid excessive spread onto black trims.
- pH: 9.0 - 11.0
- Viscosity: 0.0 - 0.0
- Colour: Pale Brown
- Odour: Perceptible odour
- Clarity: Opaque
- Aquatic Chronic 3