Skip to Content

O/W Polish – Cutting

O/W Polish – Cutting is a high cutting polish and is intended to be used as part of a multi-step process followed by intermediate stage polish (and finishing, if required).

Features


  • High Cut/Low Polishing

O/W Polish – Cutting is a high cutting polish and is intended to be used as part of a multi-step process followed by intermediate stage polish (and finishing, if required).

Product SKU: A-609

This product is based on a blend of soft, diminishing abrasives and hard, ceramic abrasives. It contains no fillers. The ceramic abrasives provide a high and persistent cut, while the diminishing abrasives quickly break down under work, producing a finer abrasive composition that enables a more uniform cut. The lack of fillers means that the finish is due to the permanent correction of surface damage, rather than transient filling.

Application


This product is intended to be applied using a machine with a suitable pad or applicator and worked on the surface until the desired finish is produced. A second stage polishing step is essential to complete the paint finish.

Dilution


The product should be used as supplied.

Special Care


Care should be taken to avoid excessive spread onto black trims.

Specification


  • pH: 9.0 - 11.0
  • Colour: White
  • Odour: Perceptible odour
  • Clarity: Opaque

Classification


  • Aquatic Chronic 3
filter by
Air Care All Purpose Cleaner Clay Lubricants Degreaser Detailing Spray Fallout Remover Glass Cleaner Interior Preparation Microfibre Care Misc Panel Wiping Pet Care Polish/Paint Prep Pre Wash (Non TFR) Raw materials
Rinse Aid Sealant Shampoo Snowfoam Tar Remover Traffic Film Remover Tyre & Trim Dressing Waterless Wash
Wax Wheel Cleaner
Blog posts
6th June 2021

Job Opportunity: Production/Manufacturing Lead (Chemical)

We’re looking for an experienced Production/Manufacturing Lead to join our team.  Do you want...

read more

16th April 2021

Are Your Biocides Protecting You, or Just Adding Another Unnecessary Hazard?

By Dr Adam Hunniford – PiP Chemicals There was a time when the word...


12th March 2021

PRESS RELEASE: Leading Chemical Company Warns Of Need For Biocide Certification

Expert Dr Adam Hunniford Warns Market May Be Flooded With Toxic Hand Sanitisers A...