- High Dilution
- Moderate-low foam
- High Cleaning Power
Industrial TFR 2 is a caustic cleaner, with moderate foam and anti-corrosion additives, for removing traffic film.
This product provides very good cleaning power with an intermediate foam profile. The formula contains corrosion inhibiting surfactants and thresholding sequestrants that decrease the tendency for water spots after rinsing. It is intended for use on commercial and industrial vehicles, but may be used on heavily soiled domestic vehicles if material compatibility is confirmed by an experienced user.
This product is intended to be diluted and applied using a pressure washer dosing system or pump sprayer. After a short contact time, the surface should be either agitated and rinsed, or rinsed without agitation, as required.
For general purpose cleaning, the product should be dosed between 1% and 2%. For use through a pump sprayer, dilute with one part product to 50-100 parts water, depending on the degree of soiling. Stronger solutions may also be employed, following a spot test to ensure compatibility.
The product should not be allowed to dry on the surface so care should be taken in warm conditions including direct sunlight. If using on vehicles with sensitive surfaces or trims carry out a spot test prior to use.
- Density: 1.07 - 1.09
- Solids: 15.0 - 17.5
- pH: 12.0 - 13.0
- Colour: Colourless
- Odour: Perceptible odour
- Clarity: Transparent
- Skin Corr. 1A