Features
- Easy to use
- Intermediate Cut & Polish
High Solvent Polish – Intermediate is a general purpose polish with an intermediate cut and high work time, for the removal of most swirl mark defects. It can be used as part of a multi-step process or as a single step polish.
This product is based on a blend of soft, diminishing abrasives and contains no fillers. The abrasives initially give a higher cut but then break down under work, giving a fine abrasive composition which produces very high polishing effects with minimal cut. The lack of fillers means that the finish is due to permanent correction of surface damage, rather than transient filling. The high solvent content results in a product which can be machined for a longer time, allowing more correction without drying out. It can remove significantly more damage than the mild version, while still giving a good finish.
Application
This product is intended to be applied either by hand, or using a machine, with a suitable pad or applicator, and worked on the surface until the desired finish is produced.
Dilution
The product should be used as supplied.
Special Care
Care should be taken to avoid excessive spread onto black trims.
Specification
- pH: 9.0 - 11.0
- Colour: Brown
- Odour: Solvent
- Clarity: Opaque
Classification
- Aquatic Chronic 3
- STOT SE 3
*New Post* Head of Technical
Head of Technical The purpose of this role is to Engage and Excite...
read moreIndustrial and Commercial Vehicle Cleaning
Winter Vehicle Washing Now that winter has arrived, so has the need for heavy...
**Job Opportunity**
Chemist Location: Newtownards Hours: 37.5 Hours, Monday – Friday, 9am – 5pm Salary: ...