Nano Glass Sealant

A highly advanced blend of surface modifiers and nano-particles. Bonds tenaciously to glass and glazed surfaces providing an extremely durable and water repellent character. Treated glass will repel water at speeds as low as 30mph with some screen geometries and eliminates the need for wipers at higher speeds. Nano Glass Sealant is extremely easy to apply and can last several years, depending upon wiper usage. To ensure optimal application, the glass should be machine polished, prior to application, to ensure that no contamination or previous water repellents persist.

Features:

  • Extremely Easy to Use

  • Highly Durable

  • Super water repellent

Application:

Application should be to spotlessly clean glass which is free from any residues of other, previously used, glass treatments. If in doubt, the glass should be machine polished (briefly) using an abrasive polish and wiped down with isopropanol. If no previous treatment has been carried out, a thorough clean and wipe with IPA will be adequate. Application should be with a make-up pad or similar applicator. A few drops should be added to the applicator and worked into the screen, working with a small area at a time. After allowing to cure for approximately 30 minutes, the product should be buffed off with the aid of a water spray.


Quick Glass Sealant

A polymeric treatment for glass to render it hydrophobic and minimise the need for wiper use. Very easy to apply, does not require special preparation and provides several months of protection.

Features:

  • Extremely Easy to Use

  • Durable

  • Super water repellent

  • No special preparation required.

Application:

Application should be to clean glass. Application should be with a make-up pad or similar applicator. A few drops should be added to the applicator and worked into the screen, working with a small area at a time - the hydrophobic character should start to become apparent almost immediately. After allowing to cure for approximately 30 minutes, the product should be buffed off with the aid of a water spray.


Glass Cleaner

A powerful combination of solvents and surfactant designed to dissolves oils and dirt to leave a sparkling, streak free finish. Suitable for interior and exterior use.

Features:

  • Streak free finish

  • Interior and exterior use

  • Dilutable

Application:

Apply using a trigger spray. Wipe with a fine microfiber cloth and buff until dry.


High Solvent Glass Cleaner

A high strength glass cleaner for the ultimate in streak free cleaning. Suitable for interior and exterior use.

Features:

  • Streak free finish

  • Interior and exterior use

  • Dilutable

Application:

Apply using a trigger spray. Wipe with a fine microfiber cloth and buff until dry.


Water Repellent Glass Cleaner

Not only is this product a superb window cleaner but it is also an incredibly easy to use hydrophobing agent for glass. The blend of solvents, surfactant and builders ensures that particulate and oily matter are easily removed from glass surfaces. The novel hydrophobing agent bonds incredibly rapidly to the glass surface meaning that application is as easy as spray and wipe. Glass surfaces will immediately take on a hydrophobic character meaning that any water contacting the surface will be repelled, forming a droplet which can then run off, particularly when a vehicle is in motion where the airflow literally sucks the water off the screen. As a result, use of this product dramatically reduces and even eliminates the need for windscreen wipers. In addition to this, the effect is long lasting and can last months before the hydrophobic character is lost.

Application is remarkably easy. Spray directly onto exterior glass, spread and work with a soft cloth and then buff to a streak free finish. Alternatively apply directly to a cloth and work as before. Application need not be to a well prepared or cleaned surface, even if the surface is dirty or wet, spray the product directly onto the area to be treated and the performance will almost immediately be observed. Even if the surface is not dried and buffed the water repelling properties will be created. As a result, it may also be used as a screenwash additive. For summertime use, dilution to 20% is adequate whilst in winter (to approx -5C) the product should be used as supplied.

Features:

  • Supremely easy to use

  • Strong water repellent effect - wiperless action

  • Very effective cleaning and streak free finish

  • Usable as a screenwash

Application:

Apply using a trigger spray. Surface need not be pre-cleaned or dried. Apply either to cloth or surface, spread and wipe. Buff to a finish if desired (not required to achieve hydrophobic action).


Antifog Glass Treatment

A novel glass treatment which leaves a coating which inhibits fogging and misting which is a particular problem during the winter. The coating last for several weeks but should not be wiped since this will degrade the performance.

Features:

  • Antifog coating

  • Several weeks durability

  • Good clarity

Application:

Apply with a soft cloth or pad ensuring full coverage. Leave the coating to dry and buff to a finish, if necessary.


Screenwash

A range of screenwash formulations to suit all requirements. Can be provided for summer or winter use and in ready for use or concentrate form. We can tailor the product to any temperature performance required.


De-Icer

A range of de-icer formulations to suit all requirements. We can tailor the product to any temperature performance required.